O2 Spoof 001

Stuff needed for rear O2 sensor mod, 1/2" bit, drill, anti-fouler, anti-sieze, 7/8" wrench, MAF spray or not

Drilled out anti-fouler for remounting sensor(NOTE: look closely - be sure to use the sealing washer that comes in the kit on the anti-fouler)

O2 sensor gets anti-sieze compound and is screwed into the modded anti-fouler

install the modded sensor into the exhaust bung and tighten with moderate pressure into bung - the wall of the anti-fouler is thinner - be careful Herc

After reconnecting the wiring, remove the jack stands/jack. Clear the code in the PCM and take a 50 mile or so trip to reinitalize everything!